This tutorial was written by me on October 10, 2020. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have a working knowledge of PS.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using CS5 but this tutorial should work with any version.

You can download the 7 day trial of PS here.

PTU Tube:  I am using a beautiful tube called "Georgina" created by Verymany.  Please do not use this tube without a proper license.  

You can purchase this tube at Verymany's store here. 

PTU Kit:  I am using a gorgeous matching kit called "Death Becomes Her" created by Doodle by Design.  You can purchase the kit here.

PTU Animation:  I am using Rebel Dezigns animation 1671 from package 556.  You can purchase her fun animation at CDO here. 

Mask:  86 by Vivienne's Paintbox. Thank you for your awesome masks.  You can download it from her blog here. I am using the png versions for this tutorial. 

Font of choice for your name.

Plug in: None

Drop shadow of choice.

Please read all the Artist's/Designer's TOU.

To open an image, I click on the element or paper in the file folder and drag it into PS.

To transfer an element or paper in PS to my tag, I left click and drag it into my working canvas.  

The other way is to left click and drag the element from the folder right onto your tag. 

Either way you will get the same results :).  I will be using the both method for this tutorial.

For resizing and rotating I use the Ctrl+T command.

To mirror or Flip go to Edit, Transform, Flip Horizontal (mirror) or Flip vertical (Flip).

Remember to save your tag often in case PS crashes.  I always save my tags as a psd image.  It keeps all the layers and if you make tags for others you will always have the template.

Let's get started.

File>new 800x800 px transparent image.  We will resize later.

Add a new layer and flood fill with white.

Select mask 86 and drag it into the tag.  Your free transformation box will appear.  Click the link icon between the W and H and type 39%.  Click ok.  

Drag paper 26 into your tag.  Holding down the shift key, pull the top left corner and bottom right corner of the paper until it fits the canvas.  Click the check mark.  

Standing on the paper layer in the layers pallet, right click and select create a clipping mask.  

Drag element 74 into your tag.  Click the link icon between the W and H and resize 20%.  Click the check mark. Move to the top of the mask.

Drag element 52 into your tag.  Click the link icon between the W and H and resize 70%.  Click the check mark. Move to the top of the mask just to the left of the moon.

Drag element 15 into your tag.  Click the link icon between the W and H and resize 40%.  Click the check mark. Move to the top of the mask just to the right of the moon.

Drag element 150 into your tag.  Click the link icon between the W and H and resize 30%.  Click the check mark. Move to the left of the mask by the bird cage.

Drag element 78 into your tag.  Click the link icon between the W and H and resize 30%.  Click the check mark. Move to the top of the mask just to the right of the moon.

Drag element 147 into your tag.  Click the check mark. Move to the right of the house.

Drag element 119 into your tag.  Click the link icon between the W and H and resize 30%.  Click the check mark. Move to the left of the mask by the bird cage.

Drag element 119 into your tag.  Click the link icon between the W and H and resize 30%.  Click the check mark. Move to the left of the mask under the bird cage.

Drag frame 1 into your tag.  Click the link icon between the W and H and resize 80%.  Click the check mark. Move to the bottom of the house.  Using your magic wand, click in the center of the frame.  Select, modify, expand by 5.

Select the house layer and drag paper 24 into the tag.  Resize 70% and move it into the frame.  Standing on the paper layer, go to Layers, Layer mask, Reveal selections.

Drag the close up tube into the tag.  Resize 60% and mirror.  Move into the frame.  Once you like the placement, holding down the alt key, select the mask on the paper layer and drag it into the close up layer.  Release the mouse and alt key.  You should now have two mask layers.  One on the paper layer and one on the close up layer.  Change the blend mode to soft light on the close up tube.

Drag element 134 into the tag.  Click the check mark.  Move to the top center of the frame.

Select the frame layer.

Drag frame 4 into your tag.  Move the little square of the resize box until it fits frame 1.  Move over the frame.

Drag element 85 into your tag.  Click the link icon between the W and H and resize 25%.  Click the check mark. Rotate by 15 degrees. Move to the top right of the frame.

Drag element 58 into your tag.  Click the link icon between the W and H and resize 20%.  Click the check mark. Move to the bottom right of the frame.

Drag element 46 into your tag.  Click the check mark. Move it to the bottom right of the frame.

Drag element 48 into your tag.  Click the check mark. Move it to the right of the frame.

Drag element 121 into your tag.  Click the link icon between the W and H and resize 30%.  Click the check mark. Move to the bottom of the gate.

Drag element 60 into your tag.  Click the link icon between the W and H and resize 20%.  Click the check mark. Move to the bottom left of the flower cluster.

Drag element 43 into your tag.  Click the link icon between the W and H and resize 20%.  Click the check mark. Move to the bottom of the boo pumpkins.

Drag element 24 into your tag.  Click the link icon between the W and H and resize 15%.  Click the check mark. Move to the top left of element 121 by the gate.

Drag element 62 into your tag.  Click the link icon between the W and H and resize 30%.  Click the check mark. Move to the bottom right of of the spider pumpkin.

Drag element 3 into your tag.  Click the link icon between the W and H and resize 15%.  Click the check mark. Move to the bottom left of the frame.

Drag element 11 into your tag.  Click the link icon between the W and H and resize 10%.  Click the check mark. Move to the bottom right of the vase.

Drag element 21 into your tag.  Click the link icon between the W and H and resize 35%.  Click the check mark. Move to the bottom left of the vase.

Drag element 37 into your tag.  Click the link icon between the W and H and resize 30%.  Click the check mark. Move to the bottom of the clock.

Drag element 69 into your tag.  Click the link icon between the W and H and resize 30%.  Click the check mark. Move to the bottom of the pumpkin.

Drag element 135 into your tag.  Click the check mark. Move it to the left of the house.

Drag wordart 1 into your tag.  Resize 70% and move it to the top left of the frame.

Select the main tube.  click and drag it over to your tag.  Hit Ctrl + T.  In your tool bar. Click on the link between the Width and Height to lock them.  When we type in a number it will resize both the width and Height as the same time.  Type 35% in the Width and then click on the check mark at the end of the tool bar.  Move the tube to the bottom right of the mask.  Duplicate, on the duplicate to go Filter, blur, Gaussian blur set to 3.  Change the blend mode to soft light and lower the opacity to 70%.

Drag element 40 into your tag.  Click the link icon between the W and H and resize 30%.  Click the check mark. Move to the bottom right of the tube.

Drag element 95 into your tag.  Click the link icon between the W and H and resize 30%.  Click the check mark. Move to the bottom center of the tube.

Drag element 31 into your tag.  Click the link icon between the W and H and resize 40%.  Click the check mark. Move to the bottom left of the tube by her knee.

Drag element 7 into your tag.  Click the link icon between the W and H and resize 30%.  Click the check mark. Move to the bottom right of the skull.

Drag element 72 into your tag.  Click the link icon between the W and H and resize 15%.  Click the check mark. Move to the bottom left of element 40.

Drag element 80 into your tag.  Click the link icon between the W and H and resize 40%.  Click the check mark. Move to the bottom of the candle.

Drag element 44 into your tag.  Click the link icon between the W and H and resize 25%.  Click the check mark. Move to the bottom of the flower cluster.

Drag element 77 into your tag.  Click the link icon between the W and H and resize 15%.  Click the check mark. Move to the bottom right of the books.

Drag element 73 into your tag.  Click the link icon between the W and H and resize 25%.  Click the check mark. Move to the bottom center of the books.

Drag element 33 into your tag.  Click the link icon between the W and H and resize 30%.  Click the check mark. Move to the bottom left of the books.

Drag element 50 into your tag.  Click the link icon between the W and H and resize 30%.  Click the check mark. Move to the bottom left of the books.

Drag element 32 into your tag.  Click the link icon between the W and H and resize 20%.  Click the check mark. Move to the left of the mask by the bird cage.

Add any other elements you like and make any adjustments to the layers.

Crop away any extra space.  

Image, Image Size and resize 650 on the longest side.  See my settings below.

Oh almost forgot we need to drop shadow all of our elements.  I actually do the drop shadow at the end :)

Select the element on the bottom of your tag in the layer pallet and double click it.

A layer style window will pop up.  Click on Drop shadow. and use the following settings.

Now right click on the layer you just applied the drop shadow.  Click copy layer style.

Now click on the layer above and hold down the shift key, select the layer just under the paper layer.  Right click and paste layer styles.  

Select the lightning layer hold down the shift key, select the main tube layer.  Right click and paste layer styles.  

Select the layer above the Gaussian blur tube, hold down the shift key, select the top layer.  Right click and paste layer styles. 

Drop shadow complete :)

Add your copyright and name.

If you do not want to animate.  Hide the white background layer Save your tag and export as png.

Might want to grab a coffee :)

Open Rebel Dezigns psd file in PS.  You will notice that there is 25 layers in this animation and it does not have the group layer.  That is ok as we are going to learn how to do this so it matches the animation layers of the tube.

We need to group all odd the layers.  Starting from layer 25, hold down your control key and select each odd layer so the next one will be 23 then 21 etc.  Once all the odd layers are selected (the layers will be highlighted in blue) we need to group them.  All odd layers selected? 

Next we need to group these layers.  Go to Layers, Group layers or Ctrl + G on the Keyboard.  You will see group 1 folder at the top.  Make sure Group 1 is selected.

Select the layer you would like the animation to be placed.  I selected the tube close up layer under the frame layer.

Back to the animation.  Click on Group 1 and drag it into your tag.  Ctrl+T and resize 50%.  Move to a spot you like best within the frame.  Now we need to add a mask layer to the animation.  Hold down the alt key and left click on the mask on the close up layer.  Drag the mask onto the group layer.  You should now have the mask layer added to the group layer.

Close the original animation and don't save changes.

Click on the little white arrow beside Group 1 to expand it.  Click on the eyeball of each layer to hide it but leave frame layer 1 visible.  Click on the arrow beside group one to hide it as we do not want to accidentally make any changes.

Next make sure your animation viewer is open on the bottom of PS.  I you do not see a row that has Animation (Frames) on the bottom, go to Windows, Animation.

Next is animating.

Click on the little icon at the right end of the animation screen then select make frames from layers.

When the pop up shows select  Make Frames from Layers

You are going to see a big mess in the animation window but we are going to fix this.

Click on the first frame and click on the trash can in the animation window.  Repeat this until you reach the first frame of the animation.  

Now you should be at the first frame of the animation.  Click on frame 14 and hit the trash can.  Repeat for all the remaining frames.  You should be left with 13 frames in the animation window.  This is the amount of frames for our animation.

This next step is very important.  Any changes you do from here you must be on frame 1 in the animation window. It will be highlighted in blue.

Go to the bottom of your tag in the layers pallet.  Make sure you have animation frame 1 selected.

Click on the eyeball beside each layer to make it visible.  For the white base layer you may have to click on the eyeball a couple of times to make it visible in all the animation frames.  It's a Photoshop thing.  Do not touch the group layer.

Next, I want to slow down the animation.  With the first frame selected, hold down the shift key and click on frame 13.  This will select all the frames.

Next, click on the little black arrow beside the 0 sec as we want to change the speed.  A pop up window will appear.  

I selected 0.2 Sec.  Now click on the play button to view the animation.  Click on it again to stop it.

Click frame 1 again so we don't accidentally make any changes.

Now to save our tag as a gif.

Go to File, save for web device.

A new pop up window will appear.  Change the settings to my screen shot below.  Click on the image to enlarge it if needed.  Click save.  My screen shot will look different but the settings are the same.

I hope you have enjoyed my tutorial.  I would love to see your results.